Roof – window connections

Roof – window connections in the Zürich area – neat workmanship, technically correct.

Eurofugen – Roof – window connections in the Zürich area. We prepare the joint plan, verify substrate strength and movement, and select an approved system (neutral‑cure silicone, hybrid/MS polymer, PU) in strict accordance with manufacturer specs. Focus: Gefälle – Entwässerung. Planning priority: Fugenaufbau (Hinterfüllprofil, Primer, 2:1‑Geometrie). Standards: EN 15651 / ISO 11600; separate bitumen/PVC/TPO systems.

Quality & acceptance

  • Uniform, slightly concave finish profile
  • Documented execution incl. photo record
  • Crisp edges without staining
  • Ensure bond at two flanks; prevent three‑sided adhesion using PE backer rod
  • UV/weather‑resistant sealants fit to exposure

Planning & preparation

Primers are chosen per substrate absorption (e.g., clinker, fair‑faced concrete, fibre cement). Create square, sound flanks, define depth and install the closed‑cell backer rod precisely. Detailing at edges, reveals and penetrations is recorded in drawings. Joint layout based on panel sizes and anticipated movement; critical edge zones are eased. We verify weather and dew point; application only on dry, load‑bearing flanks. Mock‑ups with cut‑and‑pull checks provide pre‑approval.

Application & control

Maintain movement capability; remove masking in due time and verify edge adhesion. Use UV‑stable systems and protect adjacent surfaces from contamination. Transitions at profile joints and material changes are re‑worked separately. Random cut‑and‑pull checks, width/depth measurements and visual inspection are recorded. Apply sealant without bubbles, fill the joint evenly and tool to a slightly concave profile.

Material batches and working times are recorded for traceability.

On natural stone we use low‑migration, stone‑safe systems.

Material batches and working times are recorded for traceability.

Material batches and working times are recorded for traceability.

Joint routing aligns with the building’s movement grid.

Joint routing aligns with the building’s movement grid.

On natural stone we use low‑migration, stone‑safe systems.

Joint routing aligns with the building’s movement grid.

Material batches and working times are recorded for traceability.

Joint routing aligns with the building’s movement grid.

Interfaces to adjacent trades are clarified to avoid follow‑on damage.

Interfaces to adjacent trades are clarified to avoid follow‑on damage.

Interfaces to adjacent trades are clarified to avoid follow‑on damage.

On natural stone we use low‑migration, stone‑safe systems.

Material batches and working times are recorded for traceability.

Joint routing aligns with the building’s movement grid.

Care guidance and maintenance intervals are included at handover.

Care guidance and maintenance intervals are included at handover.

Material batches and working times are recorded for traceability.

Material batches and working times are recorded for traceability.

Planning & preparation

Clean substrates, define edges and limit bond areas; primers & backer rod are matched to substrate and width. Mock‑ups and dew‑point checks secure approval. Interfaces are coordinated before start.

Application & control

Apply sealant bubble‑free, tool evenly and control dimensions. Check edge adhesion, remove masking in time and re‑work transitions neatly. Everything is recorded.

Frequently asked questions (Roof)

More services

Related Services

Discover more services.