Existing condition
Removal and substrate come before the new joint or surface.
Existing material, adhesion, moisture, geometry and adjoining components determine whether local repair is sensible or a wider build-up must be reviewed.
Bathrooms, showers & kitchens
Silicone joints
Precise joints for wet areas. Tell us the area, substrate and joint dimensions.
Purpose and applications
What this service is intended to solve.
Elastic connection and sanitary joints close defined transitions, accommodate limited movement and support maintainable details. Geometry, bonding surfaces, exposure and a compatible system build-up are decisive.
- Shower, bathroom and wet room
- Kitchen and worktop connections
- Plinths, corners and component transitions
- Maintenance joints indoors
Materials
Compatibility is selected for the project, not from a product name alone.
- Silicone sealants selected for exposure and adjoining material
- Primer only after verified need and system approval
- Backing material for suitable joint geometry
Work process
From the first record to a defined scope.
- 01
Record the condition
Separate overview, details, dimensions and observable damage.
- 02
Define removal
Clarify existing layers, disposal and protection of adjoining components.
- 03
Prepare the substrate
Check strength, moisture, cleanliness, geometry and compatibility.
- 04
Execute the system
Apply the agreed materials and details within the defined conditions.
- 05
Review and hand over
Document finish, limitations, care and any maintenance joints.
Warning signs
What should be documented before work starts.
- Detachment at the joint flanks
- Cracks, discolouration or persistent moisture
- Missing, rigid or three-sided backing condition
Project preparation
What makes an enquiry useful.
- 1Record areas and approximate linear metres
- 2Note joint width and adjoining materials
- 3Take overview and detail photographs
- 4Describe use, cleaning and desired timeframe
Limitations
A new visible finish cannot compensate for every concealed defect.
Persistent moisture, movement, insufficient build-up or unsuitable adjoining materials may require a broader technical clarification before the selected work can be warranted.
Care and maintenance
Document the handover and observe changes.
Cleaning agents, ventilation, exposure and maintenance intervals depend on the installed system and use. The handover should record applicable care notes and which joints remain maintenance joints.
FAQ
Questions before requesting this service.
Which information is useful for an initial assessment?
Overview and detail photos, dimensions with units, substrate and existing material, observable damage, access and the desired timeframe.
Is removal of the existing material included automatically?
No. Removal, disposal, substrate repair, protection and finishing must be described as separate scope items and confirmed in the quotation.
Can the final system be selected from photos?
Photos support preparation, but compatibility, moisture and concealed build-up may still require testing or an on-site inspection.
Scope and cost factors
Compare the work, not just a metre or area rate.
Only verified joint-sealing guide values are shown on the estimate page. Coating area prices are not invented.
Total length and joint cross-section
Removal of existing sealant
Cleaning, bonding surfaces and primer requirement
Access, protection and staging
Measurement tool
Record dimensions with units.
A result remains a planning value until it is explicitly transferred to the shared project draft.
Open matching toolProject checklist
Prepare photos, condition and access.
Checked steps are saved to the same draft; they are not a technical approval.
Open checklistProfessional review
Continue from your recorded facts.
The assistant, appointment calendar and enquiry use the same project context.
INSPIRATION
Joints, connections and surfaces in detail
Ideas for surfaces, materials and thoughtful junctions.
AI-generated illustrations for inspiration, not photographs of completed customer projects.
